Home / Blog Center / Chargers / Why Your Solar Lights Aren’t Working and How to Fix Them
26/08/2025 | IABIFO
Nowadays, in the interest of natural security and vitality preservation, solar-powered lights are progressively favored by shoppers. In any case, in some cases sun powered lights may fall flat to turn on, which can be very perplexing. So, what are the arrangements for a sun oriented light that isn’t working?
Common Reasons and Arrangements for Sun based Lights Not Turning On
1. Battery Corruption
The center component of a sun based light is the sun oriented board, which changes over daylight into electrical vitality put away in the battery. Over time, with delayed utilize, the battery continuously debases, decreasing its capacity to store vitality. When the battery can no longer hold adequate charge, the sun oriented light will fall flat to illuminate.
Solution:
First, check whether the battery needs substitution. If the battery has been in utilize for a few a long time and the light’s brightness has discernibly reduced, it’s prudent to supplant it. Moment, clean the surface of the sun powered board routinely to guarantee daylight can reach it unhindered, in this manner progressing vitality transformation productivity. At long last, when the battery is completely charged, attempt to minimize utilization time to anticipate intemperate discharge.

2. Flawed Light Sensor (Photocell)
The light sensor (photocell) in a sun based light recognizes surrounding light levels and consequently turns the light on at sunset and off at first light. If the sensor is harmed or breaking down, it may come up short to distinguish haziness, anticipating the light from turning on—even when there is plentiful daylight amid the day.
Solution:
Inspect the light sensor for physical harm or destitute circuit associations. If any issues are found, supplant or repair the sensor expeditiously. Also, keep the sensor clean and free from tidy or grime that may meddled with its capacity to identify light changes.

3. Free Bulb Holder or Erroneous Wiring
The bulb holder interfaces the sun based light to the battery and inner circuitry. If the holder is free or the wiring is off base, electrical current cannot stream appropriately, coming about in the light falling flat to turn on.
Solution:
Check whether the bulb holder is safely connected to the light installation and confirm that all wiring is accurately associated. If any detachment or off base associations are found, alter and fix them to guarantee a steady electrical connection.

4. Obstacle Amid Charging
Solar lights depend on their sun based boards to assimilate daylight and charge the battery. If the board is blocked by clears out, soil, feathered creature droppings, or other flotsam and jetsam, it cannot get satisfactory daylight, anticipating the battery from charging and causing the light to stay off.
Solution:
Regularly assess the sun based board for any hindrances and guarantee it has a clear presentation to daylight. Clean the board surface as required to keep up ideal charging performance.
5. Hardware Harm or Inside Disappointment
Beyond the over issues, the sun based light may come up short due to inside component harm, such as broken wires, a defective circuit board, or a imperfect switch.
Solution:
If the sun oriented light more than once comes up short to work, consider the plausibility of inside harm. You may endeavor fundamental repairs if you have the aptitudes, or counsel a proficient professional for conclusion and repair.

Editor’s Rundown:This concludes our direct on investigating sun oriented lights that won’t turn on. Whereas the causes can change, most issues can be settled through cautious assessment and legitimate support. In every day utilize, routinely check all components of your sun oriented lights, keep them clean, and perform convenient support to guarantee they proceed to give dependable, warm, and eco-friendly light.